Part Number Hot Search : 
LA38B IR9431 BAV199F RM302615 LTC1392 RTGN432P 611237 0732G
Product Description
Full Text Search
 

To Download HMC121C8 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MICROWAVE CORPORATION
HMC121C8
V03.0400
GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR DC - 10 GHz
FEBRUARY 2001
Features
WIDE BANDWIDTH: DC - 10 GHz LOW PHASE SHIFT VS. ATTENUATION
General Description
The HMC121C8 is an absorptive Voltage Variable Attenuator (VVA) in a non-hermetic surface-mount package covering DC - 10 GHz. It features an on-chip reference attenuator for use with an external op-amp to provide simple single voltage attenuation control, 0 to -3V. The device is ideal in designs where an analog DC control signal must control RF signal levels over a 25 dB amplitude range. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave point-topoint and VSAT radios. See HMC121G8 for a hermetic SMT version of this device.
2
SMT ATTENUATORS
25 dB ATTENUATION RANGE SIMPLIFIED VOLTAGE CONTROL
Guaranteed Performance, 50 ohm system, -55 to +85 deg C
Parameter Inse rtion L oss DC - 6 GHz : DC - 8 GHz : DC - 10 GHz : DC - 6 GHz: DC - 10 GHz : DC - 8 GHz: DC - 10 GHz : tRISE, tFALL (10/90% RF): tON, tOFF (50% CTL to 10/90% RF): Input Power for 0.25 dB C ompre ssion (0.5 - 10 GHz) Input Third Order Intercept (two - 8 dBm signals, 0.5 - 10 GHz) Min. Atten: Atten. >2 dB: Min. Atten: 20 25 11 8 Min Typical 2.0 2.2 3.5 25 30 15 12 3 6 +3 -3 +18 +10 Max 2.5 3.2 4.5 Units dB dB dB dB dB dB ns ns dBm dBm dBm dBm
Attenuation Range Return Loss Switching Characteristics
12 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Web Site: www.hittite.com
2 - 14
HMC121C8
MICROWAVE CORPORATION
HMC121C8 SMT VOLTAGE-VARIABLE ATTENUATOR DC - 10 GHz
V03.0400
FEBRUARY 2001
Insertion Loss
0 -40 C INSERTION LOSS (dB) -1
Relative Attenuation
0
ATTENUATION (dB)
+25 C -2
-10 6 dB 3 dB 0 dB
-20
-3 +85 C -4
2
24 dB 18 dB 12 dB 8 10 12
-30
-5 0 2 4 6 8 10 12 FREQUENCY (GHz)
-40 0 2 4 6 FREQUENCY (GHz)
Return Loss
0 -5 S11 RETURN LOSS (dB) -10 -15 -20 -25 S22 -30 -35 0 2 4 6 8 10 12 FREQUENCY (GHz)
Relative Attenuation vs. Control Voltage @ 4.2 GHz
0 V2 CONTROL VOLTAGE (Vdc) -0.5 -1 -1.5 -2 -2.5 V1 -3 0 5 10 15 20 25 30 RELATIVE ATTENUATION (dB)
Relative Phase
85 24 dB 75 65 15 dB 55 45 35 3 dB 25 15 5 -5 0 2 4 6 8 10 12 FREQUENCY (GHz) 9 dB 21 dB
Relative Attenuation vs. Control Voltage @ 10 GHz
0 V2 CONTROL VOLTAGE (Vdc) -0.5 -1 -1.5 -2 -2.5 -3 0 5 10 15 20 25 30 RELATIVE ATTENUATION (dB)
RELATIVE PHASE (DEG)
V1
12 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Web Site: www.hittite.com
2 - 15
SMT ATTENUATORS
HMC121C8
MICROWAVE CORPORATION
HMC121C8 SMT VOLTAGE-VARIABLE ATTENUATOR DC - 10 GHz
FEBRUARY 2001
V03.0400
Input Third Order Intercept vs. Attenuation
THIRD ORDER INTERCEPT (dBm)
30 Reference 10 dB 20 25
Input Second Order Intercept vs. Attenuation
SECOND ORDER INTERCEPT (dBm)
60 Reference 50 3 dB
2
SMT ATTENUATORS
40
15 6 dB 10 3 dB 5 0 1 2 3 4 5 6 7 8 9 10
30 6 dB 20 10 dB
10 0 1 2 3 4 5 6 7 8 9 10
FREQUENCY (GHz)
FREQUENCY (GHz)
0.25 dB Compression vs. Attenuation
15
1 dB Compression vs. Attenuation
15
0.25 dB COMPRESSION (dBm)
10 Reference 5 6 dB 0
1 dB COMPRESSION (dBm)
Reference 10
5
0 6 dB -5
-5
-10 0 1 2 3 4 5 6 7 8 9 10
-10 0 1 2 3 4 5 6 7 8 9 10
FREQUENCY (GHz)
FREQUENCY (GHz)
Second Harmonic vs. Attenuation
70
SECOND HARMONIC (dBc)
Reference 60
3 dB
50 6 dB 40 10 dB 30 0 1 2 3 4 5 6 7 8 9 10
FREQUENCY (GHz)
12 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Web Site: www.hittite.com
2 - 16
HMC121C8
MICROWAVE CORPORATION
HMC121C8 SMT VOLTAGE-VARIABLE ATTENUATOR DC - 10 GHz
V03.0400
FEBRUARY 2001
Schematic
50 50
Absolute Maximum Ratings
RF Input
RF2
+16dBm +1.0 to -6.0 Vdc -65 to +150 deg C -55 to +85 deg C
RF1
Control Voltage Range Storage Temperature Operating Temperature
500
500
500
2
SMT ATTENUATORS
500
V2 I
O V1
Outline Drawing
1.
2. 3. 4.
5.
MATERIAL: A) PACKAGE BODY & COVER : WHITE ALUMINA (92%) B) LEADS & PACKAGE BOTTOM: COPPER PLATING : ELECTROLYTIC GOLD 100 - 200 MICROINCHES OVER ELECTROLYTIC NICKEL 100 TO 200 MICROINCHES. DIMENSIONS ARE IN INCHES (MILLIMETERS). UNLESS OTHERWISE SPECIFIED TOL. ARE 0.005(0.13). ALL UNLABELED LEADS ARE GROUND. THESE LEADS ARE CONNECTED INTERNALLY TO THE PACKAGED BOTTOM GROUND. THE PACKAGE BOTTOM RF GROUND MUST BE SOLDERED TO THE PCB RF GROUND. PACKAGE LENGTH AND WIDTH DIMENSIONS SHOWN DO NOT INCLUDE LID SEAL PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.005 (0.127MM) PER SIDE.
12 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Web Site: www.hittite.com
2 - 17
HMC121C8
MICROWAVE CORPORATION
HMC121C8 SMT VOLTAGE-VARIABLE ATTENUATOR DC - 10 GHz
FEBRUARY 2001
V02.0400
Single-Line Control Driver
50 50
RF1
RF2
2
500 500 500
SMT ATTENUATORS
500
V2
I
O V1 CTL
+5V
1N4148
500
3.9K 500 3.9K
TL321 OR EQUIVALENT
-5V
External op-amp control circuit maintains impedance match while attenuation is varied. Input control ranges from 0 Volts (min. attenuation) to -2.5 Volts (max. attenuation.)
12 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Web Site: www.hittite.com
2 - 18
HMC121C8
MICROWAVE CORPORATION
HMC121C8 SMT VOLTAGE-VARIABLE ATTENUATOR DC - 10 GHz
V02.0400
FEBRUARY 2001
Evaluation PCB
2
SMT ATTENUATORS
The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom ground should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request.
List of Material
Item J1 - J2 J3 - J7 U1 PCB* Description PC Mount SMA RF Connector DC PIN HMC121C8 VVA 102084 Eval Board
* Circuit Board Material : Rogers 4350
12 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Web Site: www.hittite.com
2 - 19


▲Up To Search▲   

 
Price & Availability of HMC121C8

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X